3
To search ensembles of higher frequencies
To search ensembles of lower frequencies
Start searching an ensemble.
When an ensemble is received, searching stops.
To stop searching before an ensemble is
received, press the same button you have pressed for searching.
ENGLISH
4
1
2
Select a service you want to listen to.
1Press MODE.
“MODE” appears on the lower part of the display.
2Press 
¢or 4
to select a service you want, while “MODE” is still on the display.
To change the display information while tuning into an ensemble
Normally service name is shown on the upper part of the display.
If you want to check the ensemble name or its frequency, press DISP (Display).
Each time you press the button, the following information appears for a while on the upper part of the display:
Service name 
Ensemble name 
Frequency
To tune in a particular ensemble without searching:
1 Press FUNC (Function) repeatedly to select the DAB tuner as the source.
2 Press MODE.
3 Press BAND repeatedly to select the DAB band (DAB1, DAB2, or DAB3).
4 Press and hold 
¢or 4
for more than 1 second.
5 Press 
¢or 4
repeatedly until the ensemble you want is reached.
• If you hold down the button, the frequency keeps changing until you release the button.
49
