JVC KD-LX3R Radio Operations, Listening to the radio, Select the band, Start searching a station

ENGLISH

RADIO OPERATIONS

Listening to the radio

You can use either automatic searching or manual searching to tune into a particular station.

Searching a station automatically: Auto search

		1-	1	INT/LO 1- 3 1-		2 MODE 2
1	1	2		3	Select the band.

FM1 FM2 FM3 AM

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

1Press FUNC (Function) to select “FM” or “AM.”

2Press MODE.

“MODE” appears on the lower part of the display.

3Press BAND to select the band.

Each time you press the button, the band changes as shown to the left:

Selected band (then clock	Level meter (see page 33)
time: see page 33) appears.

2	To search stations of
	higher frequencies	Start searching a station.
	To search stations of	When a station is received, searching stops.
	lower frequencies

To stop searching before a station is received, press the same button you have pressed for searching.

To tune in FM stations only with strong signals

This function works only while searching FM stations, including SSM preset (see page 8).

1 Press MODE.

“MODE” appears on the lower part of the display.

2 Press INT/LO (Intro/Local), while “MODE” is still on the display, so that the LOCAL indicator lights up on the display.

Each time you press the button, the LOCAL indicator lights up and goes off alternately.

6