ENGLISH
3
DISP
Select the character set you want while “ 
” is flashing.
Each time you press the button, the character set changes as follows:
Capital letters 
Small letters
Numbers and symbols 
4
Select a character.
About the available characters, see page 41.
5
Move the cursor to the next (or previous) character position.
6
Repeat steps 3 to 5 until you finish inputting the name.
7
Press the button while the last selected character is flashing.
The input name is stored in memory.
To erase the input characters
Insert spaces using the same procedure described above.
Notes:
•When you assign a name to the 41st disc, “NAME FULL” appears on the display. (In this case, delete unwanted names before assignment.)
•When the CD changer is connected, you can assign names to CDs in the CD changer. These names can also be shown on the display if you insert the CDs in this unit.
40
