JVC KD-R412, KD-R312, KD-R311 Stopping playback and detaching the USB device, Cautions, 10ENGLISH

Listening to the USB device (For KD-R412/KD-R411/KD-R35)

This unit can play MP3/WMA tracks stored in a USB device.

~	Ÿ	USB input jack
		USB memory
	]Turn on the
	power.
		All tracks will be played repeatedly until you change the
		source or detach the USB device.

If a USB device has been attached...

Pressing /SOURCE turns on the power and playback starts from where it has been stopped previously.

•If a different USB device is currently attached, playback starts from the beginning.

Stopping playback and detaching the USB device

Straightly pull it out from the unit.

“NO USB” appears. Press /SOURCE to listen to another playback source.

You can operate the USB device in the same way you operate the files on a disc.

Caution on volume setting:

USB devices produce very little noise compared with other sources. Lower the volume before playing a USB to avoid damaging the speakers by sudden increase of the output level.

Cautions:

•Avoid using the USB device if it might hinder your safety driving.

•Do not pull out and attach the USB device repeatedly while “READING” is shown on the display.

•Do not start the car engine if a USB device is connected.

•This unit may not be able to play the files depending on the type of USB device.

•Operation and power supply may not work as intended for some USB devices.

•You cannot connect a computer to the USB input terminal of the unit.

•Make sure all important data has been backed up to avoid losing the data.

•Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device.

•Some USB devices may not work immediately after attaching USB device or turn on the power.

•For more details about USB operations, see page 19.

10ENGLISH

EN10-17_KD-R412_003A_f.indd 10

10/15/09 2:29:43 PM