ENGLISH

Lights up when holding the digital reception Flashes when holding the analog reception

<Auto> [Initial] Switch between digital and analog audio automatically

<Digital> Tuning to digital audio only

<Analog> Tuning to analog audio only

•If no sound can be heard from the selected setting, change the setting to <Analog> or <Digital>.

•The setting automatically changes to <Auto> if you tuned in to or change to another station, or if you turned off the power.

•This setting cannot take effect for the conventional FM/AM stations.

•If the radio station forces the reception mode to

digital or analog, the or indicator lights up.

Listening to the CD changer

It is recommended to use a JVC MP3-compatible CD changer (not supplied) with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit.

• You can only play conventional CDs (including CD Text) and MP3 discs.

Preparation: Make sure <Changer> is selected in the <Source Select> =<Ext Input> setting, see page 33.

1

2

3

 

Select “CD-CH.”

 

Enter “LIST” screen.

 

Select a disc, folder, then the track.

[Turn] =[Press]

Playback starts automatically.

• If there is no disc on the selected tray, the unit beeps.

 

 

 

•To select another folder/track while playing (for MP3 discs), repeat steps 2 and 3 above until the desired folder/ track is selected. The selection always start from disc number first.

•If another disc/folder is selected, playback starts from the 1st track of the selected disc/folder.

20