ENGLISH
Listening to the iPod/iPhone
You can connect the iPod/iPhone using the following cable or adapter:
Cable/adapter | To operate |
|
|
USB 2.0 cable (accessory of the iPod/iPhone) to the USB input terminal | See “When connected with the USB input |
on the control panel or USB cable from the rear of the unit | terminal” below. |
Interface adapter for iPod, | See “When connected with the interface |
changer jack on the rear of the unit | adapter” on page 25. |
|
|
•When iPod/iPhone devices are connected to both front and rear USB input terminals, the unit only detects and charges the first connected device.
•Disconnecting the iPod/iPhone will stop playback. Press SRC to listen to another playback source.
•For details, refer also to the manual supplied with your iPod/iPhone.
Caution:
•Avoid using the iPod/iPhone if it might hinder your safety while driving.
•Make sure all important data has been backed up to avoid losing the data.
When connected with the USB input terminal 
There are two control terminals in “iPod FRONT/ iPod REAR” source.
•<Headunit Mode> : Control by this unit.
•<iPod Mode> : Control by the connected iPod/ iPhone.
Preparation: Select the controlling terminal, <Headunit Mode> or <iPod Mode> for iPod playback:
•Press and hold BACK button.
•Make the selection from <iPod Switch> setting, see page 33.
The operations explained below are under <Headunit Mode>.
1 |
| Select “iPod FRONT” |
|
| or “iPod REAR.” |
|
| Playback starts automatically. |
2 |
| Select a song. |
|
|
|
Selecting a track from the menu
1Enter the main menu.
2Select the desired menu.
[Turn] = [Press]
Playlists Ô Artists Ô Albums Ô Songs
ÔPodcasts Ô Genres Ô Composers
ÔAudiobooks
3Select the desired item.
[Turn] = [Press]
•Repeat this procedure until the desired track is selected.
•To return to the previous menu, press BACK.
24