USB device

Bluetooth

Symptoms

Remedies/Causes

 

 

• “Cannot Play” appears on the display.

• Check whether the connected USB device or the iPod/

• “No USB” appears on the display.

iPhone is compatible with this unit.

• The unit cannot detect the USB device.

• The USB device is not connected properly. Connect the

 

USB device again.

 

 

• “Not Support” appears on the display and

Check whether the track is a playable file format.

track skips.

 

 

 

• Correct characters are not displayed (e.g.

This unit can only display letters (capital: A – Z,

album name).

small: a – z), numbers, and a limited number of symbols

 

(see page 37).

 

 

• While playing a track, sound is sometimes

The tracks have not been properly copied into the USB

interrupted.

device. Copy tracks again into the USB device, and try

 

again.

• The unit does not detect the Bluetooth

• Search from the Bluetooth device again.

device.

• Reset the unit. When “Wait Pair” appears on the

 

display, search from the Bluetooth device again.

 

 

• The unit does not make pairing with the

Enter the same PIN code for both the unit and target

Bluetooth device.

device.

 

 

• Echo or noise occurs.

Adjust the microphone unit’s position.

 

 

• Phone sound quality is poor.

• Reduce the distance between the unit and the

 

Bluetooth cellular phone.

 

• Move the car to a place where you can get a better

 

signal reception.

 

 

• The sound is interrupted or skipped during

• Reduce the distance between the unit and the

playback of a Bluetooth audio player.

Bluetooth audio player.

 

• Disconnect the device connected for Bluetooth Phone.

 

• Turn off, then turn on the unit.

 

• Connect the player again, when the sound is not yet

 

restored.

 

 

• The connected audio player cannot be

• Check whether the connected audio player supports

controlled.

AVRCP (Audio/Video Remote Control Profile).

 

(Operations depend on the connected audio player.)

 

• Disconnect and connect the Bluetooth player again.

 

 

• The unit does not response when you tried

You may have tried to copy the same entries (as stored)

to copy the phonebook to the unit.

to the unit. Press DISP or BACK to exit.

 

 

ENGLISH

Continued on the next page

REFERENCES 45