OTHER MAIN FUNCTIONS
Selecting the dimmer mode
You can dim the display at night (according to your preference).
When shipped from the factory, dimmer is deactivated.
1 Press and hold SEL (select) for more than 2 seconds.
“DEMO,” “CLOCK H,” “CLOCK M,” “DIMMER,” or “AMP GAIN” appears on the display.
Selecting the amplifier gain control
You can change the maximum volume level of this unit. When the maximum power of the speakers is less than 45 W, select “LOW PWR” to prevent them from being damaged.
When shipped from the factory, “HIGH PWR” is selected.
1 Press and hold SEL (select) for more than 2 seconds.
“DEMO,” “CLOCK H,” “CLOCK M,” “DIMMER,” or “AMP GAIN” appears on the display.
ENGLISH
2 Select “DIMMER” if not shown on the display.
3 Select the desired
2 Select “AMP GAIN” if not shown on the display.
3 Select the desired mode— “HIGH PWR” or “LOW PWR.”
•OFF: Cancels the dimmer.
•ON: Activates the dimmer.
4 Finish the setting.
•LOW PWR: You can adjust the volume level from “VOL 00” to “VOL 30.”
•HIGH PWR: You can adjust the volume level from “VOL 00” to “VOL 50.”
4 Finish the setting.
Note: |
|
If you change the setting from “HIGH PWR” to |
|
“LOW PWR” while listening at a volume level more |
|
than 30, the unit automatically changes the volume |
|
level to “VOL 30.” | 19 |