Searching for a station manually: Manual search

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as follows:

FM1 FM2 FM3 AM

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2 Press and hold ¢ or 4 until “M” (manual) starts flashing on the display.

3 Tune in to a station you want while “M” (manual) is still flashing.

To tune in to stations of

higher frequencies

To tune in to stations of lower frequencies

If you release your finger from the button, the manual mode will automatically turns off after 5 seconds.

If you hold down the button, the frequency keeps changing (in 200 kHz intervals for FM and 10 kHz for AM) until you release the button.

When an FM stereo broadcast is hard to receive

1 Press MODE to enter the functions mode while listening to an FM stereo broadcast.

2 Press MO (monaural), while “MODE” is still flashing on the display, so that “MONO” appears on the display.

Each time you press the button, monaural mode turns on and off alternately.

MO (monaural) indicator

When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved.

ENGLISH

11