Sony AV-DV75 manual Before Operation, Power Economizing Eco Mode, Press the POWER button

BEFORE OPERATION

TAPE MONITOR
POWER	Function indicators
I	I	ENTER

FRONT SPEAKERS A,B

To turn the unit on

Press the POWER button.

Operation is possible after four seconds. The VOL (volume) level or function name is displayed one after the other for the first four seconds.

The selected function indicator lights up in red and the others in green.

To change the brightness level of the display

1Press ECO so that “ECOMODE” is displayed.

2Within 4 seconds, turn the MULTI JOG to display DIM MODE, and then press the ENTER button within 4 seconds.

3Within 4 seconds, turn the MULTI JOG to select the dimmer mode as below.

The mode will be automatically set after 4 seconds. It will also be set if the ENTER button is pressed within 4 seconds after step 3.

DIM OFF -DIMMER	1- DIMMER 2-	DIMMER 3
r		n
I		I

DIM-OFF: The normal display.

DIMMER 1: The illumination of the display is dimmer than usual.

DIMMER 2: The illumination of the display is dimmer than DIMMER 1.

DIMMER 3: The illumination of the display is dimmer than DIMMER 2. The function indicators turn off.

Using the headphones

Connect headphones to the PHONES jack with a standard stereo plug (06.3 mm, 1/4 inch). Be sure to set the FRONT SPEAKERS A and B buttons to IOFF. Otherwise sound is output from the speakers.

When the headphones are plugged in:

-The Dolby Pro Logic or DSP system is automatically canceled

-The Dolby Digital Surround mode is changed to the “2chSTERE0 (2CH DOWNMIX)” mode

To select the front speaker system

To use speaker system A: Set the FRONT SPEAKERS A button to -ON.

To use speaker system B: Set the FRONT SPEAKERS B button to -ON.

To use both speaker systems: Set both the buttons to - ON. Set the button(s) to 10FF to turn off the speaker system(s).

As the front speaker systems A and B are connected in series:

-The sound will decrease slightly when using both speaker systems

-No sound can be heard if the FRONT SPEAKERS A and B buttons are set to -ON when only one speaker system is connected

When not connecting a sub woofer

Be sure to select the “SUBWOFF mode.

After pressing the DOLBY SURROUND button to turn on the Dolby Pro Logic, press the MANUAL SELECT button on the remote control once so that “SUBWON” appears on the display. Then press the UP button or turn the MULTI JOG within four seconds to display “SUBWOFF.”

To turn the unit off, press the POWER button.

POWER ECONOMIZING (ECO) MODE

1 2 3

Setting this unit to the ECO mode reduces power consumption as below.

Initial setting of the ECO mode is ON.

●When the current time is set, the clock display disappears immediately.

●While the power is off, all the display lights turn off, and only the POWER(!) STANDBY/ON indicator lights in red.

To cancel the ECO mode

1Press the ECO button to display ECO MODE while the unit is

turned on.

2Within 4 seconds, press the ENTER button.

3Within 4 seconds, turn the MULTI JOG to select ECO OFF. The mode will be automatically set after 4 seconds. It will also be set if the ENTER button is pressed within 4 seconds after step 3.

7 ENGLISH