Sony AV-DV75 Manual Tuning, Press the UP or DOWN button on the main unit to select a station

MANUAL TUNING

12

1

,,--..-:;,,.

F“mama

- MONO TUNER

To change the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the tuning interval.

Hold down the DIGITAUANALOG/BAND button and press the POWER button.

To reset the interval, repeat this procedure.

1Turn the FUNCTION to select theTUNER function, and press the DIGITAL/ANALOG/BAND button repeatedly to select the desired band.

~

The display changes to frequency indications after indicating band and video source (VI, V2 or V3) for two seconds.

2Press the UP or DOWN button on the main unit

to select a station.

Each time the button is pressed, the frequency changes. When a station is received, “TUNE” is displayed for two seconds. During FM stereo reception, 1110111is displayed.

To search for a station quickly (Auto Search)

Keep the UP or DOWN button on the main unit pressed until the tuner starts searching for a station. After tuning in to a station, the search stops.

To stop the Auto Search manually, press the UP or DOWN button.

●The Auto Search may not stop at stations with very weak signals.

When an FM stereo broadcast contains noise

Press the MONO TUNER button on the remote control so that “MONO appears on the display.

Noise is reduced, although reception is monaural.

MONO

To restore stereo reception, press the button so that “STEREO appears.

When the reception contains noise interference

Move the unit away from other electrical appliances, especially digital audio devices, or turn off the appliances that generate noise signals.

13 ENGLISH