Panasonic TQB2A0952 Mode (TV/Ant or Cable)

Mode (TV/Ant or Cable)

ACTION

Displays and Exits Menus

Located On Remote Control

Selects orAdjusts

Features When

Menu is Displayed

Highlight Desired

When

Menu is Displayed

TV/Ant or Cable Tuning Mode

IMPORTANT NOTE: The proper input mode must be

selected to match the type of signal at the antenna

input (TV or Cable).

•TV is used whenthe Receiver is not connected to a

Cable TV System, for example, when usinga VHF/

UHF antenna (Channels 02-69).

•CABLE isused whenthe Receiver isconnected toa

Cable TV System and you are not using a cable

company converter box (Channels 01-125).

NOTE: Some Cable TV Systems encode (scramble)

program material on specific channels. Acable

company supplied decoder is required to

reproduce an acceptable picture. Certain Cable

TV Systems offset some channels to reduce

interference. It will be necessary to use the

cable company supplied converter to receive

these specific channels.

1. Press the ACTION button to display the Main Menu.

2. Press the CH UP/DOWN and VOL LEFT/RIGHT

buttons to highlight the Set Up Icon.

3. Press the ACTION button to display the Set Up

Menu.

SET UP

SET TIME 8_

AUTO PROGRAM NNNOIMANUAL PROGRAM

4. Press the CH UP or DOWN button to highlight

"MODE".

5. Press the VOL LEFT or RIGHT button to select TV/

ANT (mode) or CABLE (mode).

6. Press the ACTION button twice to exit.

- 35-

Contents

Main Safety Instructions WARNING Safety Instructions For Television Receivers Specifications Channel Capability Chart Introduction Congratulations on Your New Purchase Table of Contents Installation Receiver Location IIII II J Antenna/Cable Connections @..- Incoming Cable From Home Antenna (75 Ohm) Incoming Cable From Home Antenna (300 Ohm) @ Incoming 75 Ohm Cable (From Cable Company) I Location of Controls (Receiver) \J -8- _0.7 I I Front Control Panel \ Page __ Quick Reference Control Operation (Remote Control) Power Button Volume Buttons Mute Button Channel Change- II 1(9 1 VCR Function Buttons - TheVCRFUNC- TION F--7 II_ _ [-_-] _ _-7 [CS]F--iT r---] TV/Video Button REARVIDEO/AUDIOINPUT2JACKS'_ 1 PIPVIDEO2I Recall Button R-Tune (Rapid Tune) - PresstheR-TUNE Multi Button / PIP Move Button I-q I-1 I--1 PIP Freeze Button Main Menu (Icons) L;L I :,1 AI (Artificial Intelligence) AI Sound IAI S_NDI I_e_] Picture Adjustments Color, Tint, Brightness, Picture & Sharpness Adjustments Picture Norm Auto Color and Video NR Auto Color Video NR (Noise Reduction)- This Audio Adjustment Bass, Treble & Balance Adjustment Audio Norm Surround Speaker (Off/On) and Audio Mode Selection [TV] Speaker Audio Mode Stereo/SAP/Mono PIP Features PIP (Off/On) !_1 PIP Size (Large/Small) Input Select Main (Picture) Input Selection PIP (Picture in Picture) Input Selection Timer Feature Sleep (Timer) (Program) Timer 4. Lockout Features ==== Lockout ILoc I IACTIVATE NOI Page Favorite Channel Feature Channel Scan IFAyCHSELECT NOI Fav Oh Select Favorite Channel Select- I Channel Caption Feature Channel Caption (Station Identifier)- The Closed Caption Closed Caption/Field Mode- This II- 'ION MUTE CAPTIONCII MODE 11-oo7 ON MUTE CAPTION C1 CC (Closed Caption) On Mute Closed Caption with Mute Button OFFI 3- Language Menu System Language Selection (English/Spanish/French) ===_ FRAN_AISI Set Up Features Set Time (Clock) I Set Day Mode (TV/Ant or Cable) TV/Ant or Cable Tuning Mode Auto Program Auto Programming After Auto Programming: Manual Program iI<vo,i vo,>, e n0 tu,;isW,"a% Manual Programming Programming The Universal Remote Control VCR Preferred Procedure -Code Known Programming Universal Remote Using Infra-Red Access Codes for VCRs Alternate Procedure -Code Unknown Programming Universal Remote Using the "Sequence Method" for VCRs Cable Converter Box , ople },o @ Care and Cleaning Troubleshooting Chart Before you call for service, determine the symptoms and make a few simple checks shown below. -43 - Symptoms Picture Sound X X Check Power Loss Prolonged power interruption causes the following features to reset to their factory preset state. -44-