Safety InstructionsWARNING
WARNING: To reduce the risk ofelectric shock do notremove cover or back. No
user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightningflash with ar- Theexclamation pointwithin
row-head within a triangle _ a triangleis intended to tell
is intended to tell the user A theuserthat importantoper-
thatparts inside the product ating and servicing instruc-
area riskof electricshockto tions arein thepapers with
persons, theappliance.

Note To CATV System Installer: This reminder is provided to call the CATV system installer'S attention to Article

820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.

Safety Instructions For Television Receivers

1. Read and apply the operating instructions provided with your television receiver•
2. Read allof the instructions given here and retain them forlater use.
3. Unplug this television receiver from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning•
4• Do not useattachments not recommended by the television receiver manufacturer as they may cause hazards.
5. Do not use this television receiver near water. For example: Avoid placing it near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool, etc.
6. Do not place this television receiver on an unstable cart, stand or table. The television receiver may fall, causing serious
injury to a child or adult, and serious damage to the appliance. Use only with a cart or stand recommended by the
manufacturer, or sold with the television receiver. Wall or shelf mounting should follow the manufacturer's instructions,
and should use a mounting kit approved by the manufacturer.
6A• An appliance and cart combination should be moved with care. Quick stops, excessive force, and _1_'_
uneven surfaces may cause the appliance and cart combination to overturn.
7. Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to insure
reliable operation of the television receiver and to protect it from overheating. These openings must not be blocked or
covered. The openings should never be blocked by placing the television receiver on a bed, sofa, rug or other similar
surface. This television receiver should never be placed near or over a radiator or heat register. This television receiver
should not beplaced in a built-in installation such as a bookcase unless proper ventilation is provided.
8. Operate only from the type of power source indicated on the marking label. If you are not sure of the type of power
supplied toyour home consult your television dealer or local power company. Fortelevision receivers designed to
operate from battery power, refer to the operating instructions.
9. This television receiver is equipped with a polarized alternating-current line plug (aplug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug
10•
fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your
electrician toreplace your obsolete outlet. Do
notdefeat the safety purpose of the polarized
plug.
Do not allow anything to rest on the power.
cord. Do not locate this television receiver
where the cord will be abused by persons
walking on it.
EXAMPLE OF ANTENNA GROUNDING AS
PER (NEC) NATIONAL ELECTRICAL CODE ANTENNA LEAD-IN
WIRE
11 Follow all warnings and instructionsmarked ANTENNA
• DISCHARGE UNIT
on the television receiver. (NECSECTION810-20)
12. Do not overload wall outlets and extension
cords as this can result in fire or electric
shock.
13. Never push objects of any kind into this _ROUNDINGCONDUCTORS
(NECSECTIONe10-21)
television receiver through cabinet slots as
they may touch dangerous voltage points or
short out parts that could result in afire or
electric shock. Never spill liquid of any kind on
the television receiver.
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
-2-