Power Button - Press the POWER button to
turn ON. Press again to turn OFF.
POWER
Volume Buttons - Press the VOLUME (VOL)
LEFT or RIGHT button for desired listening level (when On Screen menus are not displayed).
Located On Remote Control
_Increases
Decreases
Volume Level
Volume Level
Mute Button - Press the MUTE button to quickly
reduce sound level (Mute will appear on screen). Press again to restore sound.
MUTE
Helpful Hints:
•Helpful information will display On Screen momen- tarily when Receiver is first turned on and when the channel is changed.
•When using keyboard entry for channels 10,11 and 12 in the CABLE mode there is a slight delay before
channel change because of the capability of tuning cable channels 100 to 125.
NOTE: If "SPEAKER OFF" is displayed On Screen after pressing the VOLUME button, refer to Audio menu to turn Speakers "ON".
Channel Change- (Two options)
Option 1.
Press the CHANNEL (CH) UP or DOWN button to sequentially scan through programmed channels (when On Screen menus are not displayed).
NOTE: TV/VCR/CABLE switch (located on Remote)
must be set in TV position). | TVNC_CAB_ | |
Located On Remote | Control |
|
_=_====_._ | _ | Selects Next |
___ | Higher Channel |
Selects Next /-
Lower Channel
Option 2.
Press two digits on keyboard (Example press 0, then 5 for channel 05). For channels over 99, press three
digits on keyboard. |
|
|
I® | ® | ®1 |
I |
| ®1 I |
1(9 |
| ®1 |
VCR Function Buttons - TheVCRFUNC-
TIONbuttons have been designed to operate numerous brands of VCRs. The
prior to use. (Please refer to Programming the Universal Remote for programing instructions.)
NOTE: The TVNCR/CABLE switch (located on Re- mote) must be in the VCR position (Center).
TV/VCWCABLE
I- VCR 1
POWER RECORD I
REW PLAY FF
MOVE SIZE PIP
TVNCR STOP PAUSE
[CS]F--iT r---]
FREEZE SEARCH SWAP
VCR CHANNEL
r--_-i r-Tl
PIP CHANNEL
