Channel Caption Feature
ACTION
Displays and Exits Menus
Located On Remote Control
Highlight Desired
When
Menu is Displayed
Selects or Adjusts
Features When
Menu is Displayed
Channel Caption (Station Identifier)-
TheChannel Caption (Station Identifier) allows you to input the call names of up to 30 stations into memory (using up to 4 characters). The call name will then display, along with the channel number when changing channels or pressing RECALL.
..__XYYZ | CH 03 |
Channel Caption
(Station Identifier)
1.Press the ACTION button to display the Main Menu.
2.Press the CH UP/DOWN and VOL LEFT/RIGHT buttons to highlight the Channel Caption Icon.
3.Press the ACTION button to display the Channel Caption Menu.
_HANNEL
CAPTION
ENTER
CAPTION I
,_ TO MOVE CURSOR V& TO SELECT CHANNEL
4, Use Remote Keyboard or CH UP/DOWN buttons to enter channel number you wish to assign a Station Identifier. (See Helpful Hints.)
5.Press the VOL RIGHT button to Select CAPTION position.
6.Press the CH UP/DOWN button to select first character in Station Identifier, press VOL RIGHT button to move to second position and repeat until the complete Station Identifier is entered (up to 4 characters).
CAPTION
_HANNEL
ENTER
Helpful Hints:
To select the desired channels for the Station Identifier feature press two digits on the Remote Keyboard (Ex- ample press 0, then 5 for channel 05). If cable channel over 100 is desired press three required digits on Re- mote Keyboard.
I CHANNEL IN_ONI
# 3 I_ _] H li_i_l
<lib TO MOVE CURSOR
V& TO SELECT CHARACTER
7.Press the VOL RIGHT button repeatedly to select channel number position. Repeat steps 4 through 7 to continue adding Channel Station Identifier.
8.Press the ACTION button twice to exit.
- 30 -
