ADJUSTING DOLBY DIGITAL

ADJUSTING DOLBY DIGITAL

SURROUND SOUND

m

DOWN,UP

I ENTER

ADJUSTING DYNAMIC RANGE

Dynamic range of the Dolby Digital Surround sound can be adjusted. The unit is initially set to the “STD (standard) mode

1 While the Dolby Digital Surround is activatecl, press the ENTER button on the main uniJand hold it down until “MID NIGHTTHEATER” runs througlh

2Press the UP or DOWN button or turn the MULTI JOG to select the “MAX;’ “STD” or “MIN” mode,

~$F#~M g$:- ‘$qgr

&‘y~j

&

!!*’”**P”

~~ %#

~]. ‘~g%.%% k

A13J1JSTING LOW FREQUENCY SOUND EFFECT(LFE)

The disc recorded in Dolby Digital Surround contains special signals called LFE to enhance low frequency sound effect. The LFE signals are recorded in some particular parts on the disc and output from the connected sub-woofer to reproduce astonishingly powerful low sound.

The sound level of the LFE signals can be adjusted according to your speakers connected while the Dolby Digital Surround is activated.

1 Press the UP or DOWN button and hold it down until “LFE” is displayed.

2Press the UP or DOWN button repeatedly or turn

the MULTI JOG to adjust the LFE level.

The unit is initially set to O dB (maximum) and can be adjusted

as shown below.

0FF~-20dB~-10dB +OdB

When not using a sub-woofer
While the Dolby Digital Surround (except “2chSTEREO) is

activat(?d, press the MANUAL SELECT button on the remote control once so that “SUBWON” is displayed. Then, press the UP button or turn the MULTI JOG within 4 seconds to display “SUBWOFF.” The LFE signals are redistributed to the other speakers.

To restore, press the MANUAL SELECT button once so that “SUBWOFF is displayed, then press the DOWN button or turn the MULTI JOG to display “SUBWON.”

fihen setting the sub-woofer mode of the Dolby Digital Surround to “SUE)WOFF,” that of the Dolby Pro Logic is also set to “SUBW OFF,” and vice versa. In this case, the sub-woofer signals are redistributed to the other speakers.

MIN~STD++MAX

[MIN]

You can enjoy the full dynamic range sound like in the movie theater,
[STD]

Original position, when playing back in home, that is

recommended by the software producers.

[MAX]

Select this mode when playing back at low volume. This is the mode when playing back in the mid night.

m

ENGLISH 18

Page 19
Image 19
Sony AV-DV75 Adjusting Dolby Digital Surround Sound, Adjusting Dynamic Range, A13J1JSTING LOW FREQUENCY SOUND EFFECTLFE