Sound | Range/selectable items | ||
elements | BASS | MID | TRE |
|
|
|
|
Frequency | 60 Hz | 500 Hz | 7.5 kHz |
| 80 Hz | 1.0 kHz | 10.0 kHz |
| 100 Hz | 1.5 kHz | 12.5 kHz |
| 120 Hz | 2.5 kHz | 15.0 kHz |
|
|
|
|
Level (LVL) | |||
| +06 | +06 | +06 |
|
|
|
|
Q | Q0.5 | Q0.75 | Q0.75 |
| Q1.0 | Q1.0 | Q1.25 |
| Q1.5 | Q1.25 |
|
| Q2.0 | Q1.5 |
|
|
|
|
|
BASS: Bass MID:
The adjustment made will be stored automatically.
Adjusting the sound
You can adjust the sound characteristics to your preference.
•The adjustment you make will be stored for the currently selected sound mode (iEQ) including “USER.”
1
2
FADER*1 | R06 to F06 |
Adjust the front and rear speaker |
|
output balance. |
|
|
|
BALANCE*2 | L06 to R06 |
Adjust the left and right speaker |
|
output balance. |
|
|
|
LOUD*3 (loudness) | LOUD ON or |
Boost low and high frequencies to | LOUD OFF |
produce a |
|
low volume level. |
|
|
|
SUB.W*4 (subwoofer) | 00 to 08, |
Adjust the subwoofer output level. | initial: 04 |
|
|
VOL ADJ (volume adjust) | |
Adjust the volume level of each source | initial: 00 |
(except FM), compared to the FM |
|
volume level. The volume level will |
|
automatically increase or decrease |
|
when you change the source. |
|
•Before making an adjustment, select the source you want to adjust.
VOLUME | 00 to 50 or |
Adjust the volume. | 00 to 30*5 |
*1 If you are using a
*2 This adjustment will not affect the subwoofer output. *3 Loudness setting will be applied to all sound modes. *4 Displayed only when “L/O MODE” is set to “SUB.W”
(see page 23).
*5 Depending on the amplifier gain control setting. (See page 23 for details.)
ENGLISH
SETTINGS 21