|
| Storing your own sound | |
ENGLISH | |||
| adjustments | ||
|
| ||
|
|
| |
|
| You can adjust the sound modes (BEAT, SOFT, | |
|
| POP) to your preference and store your own | |
|
| adjustments in memory. |
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
1 Call up the sound mode you want to adjust.
SCM | • See page 15 for details. |
|
SCM
Ex.: When you select “SOFT”
2 To adjust the bass or treble level.
1Select “BAS” (bass) or “TRE” (treble).
SEL
Ex.: When you select “TRE” (treble)
2Adjust the level.
To turn on or off the loudness function.
LOUD | • See page 14 for details. |
3 Repeat step 2 to adjust the other items.
4 Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.
SCM | Your adjustment made for the |
| |
| selected sound mode is stored |
| in memory. |
SCM
5 Repeat the same procedure to store other sound modes.
To reset to the factory settings, repeat the
same procedure and reassign the preset values
listed in the table on page 15.
16