Display Mode
Setting the main display mode.
1.Press the SEL button for more than 2 seconds to set the preferred setting mode.
2.Select “DISPMODE” with the ¢
or 4
button.
3.Select the desired mode with the + or - button.
(Station name (PS NAME) ïFrequency being received (FREQ) ï Clock time (CLOCK) ï) (See page 25.)
Note:
When the “CLOCK” mode is set, clock time remains on the main display even during playback.
Display Button
The DISP button is used to select the Operation (Tuner or CD) and Clock modes. Each time the button is pressed, the display changes as follows:
Operation mode (Station name* =Frequency being received =PTY; or CD) =Clock time. The display returns to the initially preset mode after a short while.
*When the RDS or PTY signal is weak or when not tuned to an RDS or PTY station, the Station name or PTY is NOT displayed.
Other convenient tuner functions
MO/RND
Selecting FM reception sound
When an FM stereo broadcast is hard to receive:
Press MO/RND (Mono/Random) while listening to an FM stereo broadcast. The sound you hear becomes monaural but reception will be improved.
Lights up when receiving an FM broadcast in stereo.
MO
ST
To restore the stereo effect, press the same button again.
16
