CD OPERATIONS
ENGLISH
Playing a CD
1 Open the loading slot.
The control panel moves down, and the loading slot appears.
Note:
When an external component is connected to the MP3 INPUT jack, Be careful of handling a CD.
2 Insert a disc into the loading slot.
The unit draws a CD, the control panel goes back to the previous position (see page 22), and CD play starts automatically.
The display changes to show the following:
Total track number of | Total playing time of the |
the inserted disc | inserted disc |
Current track Elapsed playing time
Notes:
•When a CD is in the loading slot, selecting “CD” as
the source by pressing SOURCE 
starts CD play.
•When a CD is inserted upside down, the CD automatically ejects.
•When you play a CD Text, the disc title and performer appear on the display. Then the current track title appears on the display, followed by the track number and elapsed playing time. See also “Playing a CD Text” (page 12) and “To select the scroll mode – SCROLL” (page 19).
If a CD Text includes much text information, some may not appear on the display.
•If you change the source, CD play also stops (without ejecting the CD).
To stop play and eject the CD
Press 0.
CD play stops, the control panel moves down, then the CD automatically ejects from the loading slot.
To return the control panel to the previous
position, press 0 again.
•If you keep the loading slot for one minute (or 30 seconds when you have ejected a disc with the ignition key is turned to “OFF”) a beep sounds and the control panel returns to the previous position.
Pay attention to prevent CD and your finger from being caught in between the control panel and the unit.
Note:
If the ejected disc is not removed for about 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. (CD play will not start this time.)
11
