BASIC OPERATIONS
Note:
When you use this unit for the first time, set the
2 1
ENGLISH
1 Turn on the power and select the source.
When you press the button for the first time, the power comes on. Then each time you press the button, the source changes as follows:
FM TUNER 
DAB TUNER **
CD PLAY *
CD CHANGER **
AM TUNER
AUX INPUT 
LINE INPUT
*If a disc is not in the loading slot, you cannot select CD as the source to play.
**Without connecting the DAB tuner or CD changer, you cannot select it as the source to play.
To operate the tuner (FM or AM), see pages 8 – 10.
To play a CD,
see pages 17 – 19. To play an MP3 disc,
see pages 22 – 26.
To operate external components (AUX INPUT and LINE INPUT), see pages 37 – 38.
To operate the CD changer, see pages 39 – 40.
To operate the DAB tuner, see pages 41 – 44.
2 Adjust the volume.
To increase the volume.
To decrease the volume.
Volume level appears.
Volume level indicator
Note:
After adjusting the volume, you can push in the control dial to avoid unintended operations. To use it again, push the control dial again to make it come out.
3 Adjust the sound as you want. (See page 27.)
To drop the volume in a moment
Press and hold 
/ATT while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press and hold the button again.
•If you turn the control dial clockwise, you can also restore the sound.
To turn off the power
Press and hold SOURCE appears on the display.
until “SEE YOU”
7
