JVC KD-SX1000RJ Turning on or off the key-touchtone, Turning on or off the power amplifier switch

Models: KD-SX1000RJ

1 47
Download 47 pages 31.73 Kb
Page 32
Image 32
Turning on or off the key-touch tone

Turning on or off the key-touch tone

You can deactivate the key-touch tone if you do not want to make it beep when you press a button. When shipped from the factory, the key-touch tone is activated.

ON: Activates the key-touch tone.

OFF: Deactivates the key-touch tone.

1.Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower part of the display.

2.Select “BEEP SWITCH” with ¢ON  OFF or 4Turning on or off the power amplifier switch.

3.Select the desired mode with the control dial.

The key-touch tone alternates between on and off.

ON Manual backgroundManual background OFF

Turning on or off the power amplifier switch

You can switch off the built-in amplifier and send the audio signals only to the external amplifier(s) to get clear sounds and to prevent internal heat builtup inside this unit. When shipped from the factory, the power amplifier switch is turned on so that built-in amplifier works.

ON: Select this mode when not using external power amplifier(s).

OFF: Select this mode when using external power amplifier(s).

1.Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower part of the display.

2.Select “P.AMP SWITCH” with ¢Manual background or 4Manual background.

3.Select the desired mode with the control dial.

The power amplifier switch alternates between on and off.

ON Manual backgroundManual background OFF

32

Page 32
Image 32
JVC KD-SX1000RJ manual Turning on or off the key-touchtone, Turning on or off the power amplifier switch, On Off