3 DISP
4
Select the character set you want while “ ” | ENGLISH |
| |
is flashing. |
|
Each time you press the button, the character set changes as follows:
Capital letters | Small letters |
Numbers and symbols |
Select a character.
About the available characters, see page 36.
5
Move the cursor to the next (or previous)
SSM
character position.
6
Repeat steps 3 to 5 until you finish inputting the name.
7
SEL | Press the button while the last selected |
| character is flashing. |
The input name is stored in memory.
To erase the input characters
Insert spaces using the same procedure described above.
Notes:
•When you assign a name to the 41st disc, “NAME FULL” appears on the display. (In this case, delete unwanted names before assignment.)
•When the CD changer
You can also change the disc title of a CD Text by assigning a name to the disc. However, if you do so, its performer will not be shown after changing the disc title.
35