JVC KD-SX60WT, KD-SX50M manual Cd Operations, Playing a CD, To stop play and eject the CD, English

CD OPERATIONS

ENGLISH

Playing a CD

Insert a CD into the loading slot.

The unit turns on, draws

the CD and starts

playback automatically.

Note on One-Touch Operation:

When a CD is already in the loading slot, pressing CD (CD-CH) turns on the unit and starts playback automatically.

The CD–in indicator flashes.

The CD–in indicator lights up.

All tracks will be played repeatedly until you stop

playback.

Note:

When a CD is inserted upside down, “EJECT” and the CD–in indicator flash on the display and the CD automatically ejects.

To stop play and eject the CD

Press 0.

CD play stops and the CD automatically ejects from the loading slot. The source changes to the previously selected source.

•If you change the source, CD play also stops (without ejecting the CD).

Next time you select “CD” as the source, CD play starts from where playback has been stopped previously.

Notes:

•If the ejected CD is not removed for about 15 seconds, the CD is automatically inserted again into the loading slot to protect it from dust. (CD play will not start this time.)

•You can eject the CD even when the unit is turned off.

Total playing time	Total track number
of the inserted disc	of the inserted disc

About mistracking:

Mistracking may result from driving on extremely rough roads. This does not damage the unit and the disc, but will be annoying.

We recommend that you stop disc play while driving on such rough roads.

Elapsed playing time Current track

10