ENGLISH
• When “CEQ LINK” is set to “LINK ON,” | 3 Adjust the level. | ||||
The selected sound mode can be stored in | |||||
|
|
|
| ||
memory for the current source. |
|
|
| To increase the level | |
Each time you change to the same source, the |
|
|
| ||
|
|
| |||
|
|
|
| ||
same sound mode is also recalled and shown |
|
|
|
| |
on the display. The |
|
|
| To decrease the level | |
• When “CEQ LINK” is set to “LINK OFF” |
|
|
| ||
|
|
| |||
The selected sound mode effect applies to any source.
Storing your own sound adjustments
You can adjust the sound modes to your preference and store your own adjustments in memory.
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
1 Call up the sound mode you want to adjust.
The last selected sound mode is recalled and applied to the current source.
Sound mode indicator flashes
Ex.: If you have selected “ROCK” previously
2 Select the item you want to adjust.
• See page 14 for details.
Equalization pattern changes as you adjust the bass or treble.
Ex.: When you adjust “TRE”
4 Repeat steps 2 and 3 to adjust the other items.
5 Repeat the same procedure to store other sound modes.
To reset to the factory settings, repeat the
same procedure and reassign the preset values
listed in the table on page 15.
16
