To adjust the volume increase rate
If you find Audio Cruise increase (or decrease) the volume either too much or too little as the driving speed changes. You can adjust the increase rate by changing the boost level.
To change it, follow the procedure below.
1 Press CRUISE to select either “CRUISE 1” or “CRUISE 2.”
2 Press and hold CRUISE until the maximum boost level appears on the display.
ENGLISH
CRUISE | CRUISE |
Ex. When you have selected “CRUISE 2”
3 Rotate the control dial, while the maximum boost level is shown on the display, to change the boost level (among 1 to 15) as you want.
•To increase the volume increase rate, rotate it clockwise.
•To decrease the volume increase rate, rotate it counterclockwise.
If Audio Cruise does not function correctly
You may need to store the idling speed into memory to make Audio Cruise function correctly.
NOTICE that a number of factors, such as electric power steering, wipers, power windows, air conditioner, etc. do generate noises and, as a result, may cause Audio Cruise not to function correctly. If this is the main cause of malfunction, connect the memory backup lead (yellow lead) directly to the car battery to prevent these noises from affecting Audio Cruise.
1 Start the engine and let it warm up.
2 Press CRUISE to select either “CRUISE 1” or “CRUISE 2.”
3 Press and hold CRUISE and SEL for more than 2 seconds to store the idling speed into memory.
CRUISE | CRUISE |
Ex. When you have selected “CRUISE 2”
When the setting is complete, the unit automatically checks to see if Audio Cruise functions correctly with this new idling setting. If it does not function correctly, Audio Cruise is canceled automatically and the idling setting becomes invalid.
• If this happens, see the NOTICE above.
21
