EXTERNAL COMPONENT OPERATIONS

ENGLISH

* Not compatible withPortable MD player, etc.
digital signals.

 

Auxiliary input*
Playing an external componentYou can connect two external components to this unit.

Connect one to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied), and the other to the AUX input jack on the control panel.

Preparations:

•For connecting the Line Input Adapter KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

•Before operating the external component using the following procedure, select the external input correctly. (See “To select the external component to use—EXT IN” on page 34.)

•If the input level of the external component connected to the AUX input jack is not high enough, increase the input level properly. (See “To adjust the auxiliary input level—AUX ADJ” on page 34.)

•If “LINE IN”* does not appear on the display, see page 34 and select the external

input (“LINE IN”).*Displayed only when one of the following sources is selected—FM, AM, and CD.

To select “AUX IN” (component connected to the AUX input jack on the control panel),

press and hold CD CD-CH (AUX).

Note on One-Touch Operation:

When you press CD CD-CH (AUX), the power automatically comes on. You do not have to press to turn on the power.

42

1 Select the external component

2

Turn on the connected component
(LINE IN or AUX IN).

 

 

and start playing the source.
To select “LINE IN” (component

 

3

 

connected to the CD changer jack on theAdjust the volume.
rear), press CD CD-CH (AUX) repeatedly.

 

 

CD

LINE IN*

 

 

4 Adjust the sound characteristics you want. (See pages 30 and 31.)