JVC KD-SX995 Searching a station manually Manual search

ENGLISH

Searching a station manually: Manual search

1 Select the band (FM1 – 3, AM).

Each time you press the button, the band changes as follows:

FM 1	FM 2	FM 3	A M
(F1)	(F2)	(F3)

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2 Press and hold ¢ or 4

until “MANU” (manual) starts flashing on the display.

When an FM stereo broadcast is hard to receive:

1 Press M (MODE) to enter the functions mode while listening to an FM stereo broadcast.

“MODE” flashes on the upper part of the display.

2 Press MO (monaural), while “MODE” is still flashing on the display, so that the MO indicator lights up on the display.

Each time you press the button, the MO indicator lights up and goes off alternately.

MO (monaural) indicator

When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved.

3 Tune in to a station you want while “MANU” (manual) is flashing.

To tune in to stations of higher frequencies

To tune in to stations of lower frequencies

•If you release your finger from the button, the manual mode will automatically turns off after 5 seconds.

•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz for AM) until you release the button.

10