JVC KD-SX995 manual To erase the entered characters, Select a source you want to assign a name to

Assigning names to the sources

You can assign names to station frequencies and CDs (both in this unit and in the CD changer). After assigning a name, it will appear on the display when you select the source.

Sources	Maximum number
	of characters
Station frequencies	Up to 8 characters (up to
	30 station frequencies
	including both FM and AM)
CDs*	Up to 32 characters (up to

40discs)

*You cannot assign a name to CD Text or an MP3 disc.

1 Select a source you want to assign a name to.

When you select a source,

the power automatically comes on.

2 While pressing D (DISP), press and hold SEL (select) for more than 2 seconds.

4 Move the cursor to the next (or previous) character position.

5 Repeat steps 3 and 4 until you finish entering the name.

6 Finish the procedure while the last selected character is flashing.

To erase the entered characters

Insert spaces using the same procedure described above.

Available characters

A	B	C	D	E	F	G	H	I	J
K	L	M	N	O	P	Q	R	S	T
U	V	W	X	Y	Z	0	1	2	3
4	5	6	7	8	9	–	/	<	>

space

ENGLISH

Ex.: When you select CD as the source

3 Select a character.

• See right column for available characters.

Notes:

•When you try to assign a name to the 41st disc, “NAME FULL” appears on the display. (In this case, delete unwanted names before assignment.)

•When the CD changer is connected, you can assign names to CDs in the CD changer. These names can also be shown on the display if you insert the CDs in this unit.

29