ENGLISH

Listening to the satellite radio

Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit.

•JVC SIRIUS radio DLP—Down Link Processor, for listening to the SIRIUS Satellite radio.

•XMDirect™ Universal Tuner Box—Using a JVC Smart Digital Adapter (XMDJVC100: not supplied), for listening to the XM Satellite radio.

GCI (Global Control Information) update

•If channels are updated after subscription, updating starts automatically. “UPDATING” flashes and no sound can be heard.

•Update takes a few minutes to complete.

•During update, you cannot operate your satellite radio.

Activate your SIRIUS subscription after connection

1

2

JVC DLP starts updating all the SIRIUS channels.

Once completed, JVC DLP tunes in to the preset channel, CH184.

3Check your SIRIUS ID, see page 28.

4Contact SIRIUS on the internet at <http://activate.siriusradio.com/> to activate your subscription, or you can call SIRIUS toll-free at 1-888-539-SIRIUS (7474). “SUB UPDT PRESS ANY KEY” scrolls on the display once subscription has been completed.

Activate your XM subscription after connection

•Only Channel 0, 1, and 247 are available before activation.

1

2

XMDirect™ Universal Tuner Box starts updating all the XM channels. “Channel 1” is tuned in automatically.

3Check your XM Satellite radio ID labelled on the casing of the XMDirect™ Universal Tuner

Box, or tune in to “Channel 0” (see page 23).

4Contact XM Satellite radio on the internet at <http://xmradio.com/activation/> to activate your subscription, or you can call 1-800-XM-RADIO (1-800-967-2346).

Once completed, the unit tunes in to one of the available channels (Channel 4 or higher).

22