JVC KDX210 instruction manual Audio Settings, 08- +08, l06- R06, R06- F06

AUDIO SETTINGS
1	Press and hold MENU.
2	Turn the volume knob to make a selection (see the following table),

SUB.W LEVEL*3 -08- +08 (00): Adjusts the subwoofer output level.

	then press the knob.
	Repeat step 2-until the desired item is selected.
3	Press MENU to exit.
To return to the previous setting item or hierarchy, press!:::> PTY.

SUB.W*	4
SUB.W lPf*3

ON I OFF: Turns on or off the subwoofer output.

THROUGH: All signals are sent to the subwoofer.; lOW 55Hz I

MID 85Hz I HIGH 120Hz: Audio signals with frequencies lower than 55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer.

Default: XX

FADER*2*S	R06- F06	(00):	Adjusts the front and rear speaker output balance.
••• • ••••• •••••• • -·• ····• •••••• ••••••• • ••••• ••--••••-··•• •• •		• ••• -"••	•-••••••-•••••·•·•·•··-•••••••••• •• ••• •• • ••• ••••••• ••••• •• • • ••••••••• • ••••••w•••••• •••• ••·• ••••• •• • •••••••• •••·· .. •••-• •• •• • - -••-••-·--··-•-•••••••-•-•-••
BAlANCE*2*S	l06- R06	(00):	Adjusts the left and right speaker output balance.

EQ PRESET

FlATI HARD ROCK I JAZZ I POP I R&B.! TAlK I USER1	I USER2 I
VOCAl BOOST I BASS ~OOST I ClASSI(Al I DANCE: Selects apreset
equalizer.

. VOl ADJUST	-05 -	+05 (00): Presets the volume adjustment level of each source
	(compared to the FM volume level). Before adjustment, select the source
	you want to adjust. ("VOL ADJ FIX" appears if FM is selected.)

EASY EQ

Default:OO

PRO EQ

1	USER11 USER2: Select apreset name.
2	Adjust your own sound settings.
	1
	SUB.W* : -08 to +08/ BASS lVl: -06 to +06(
	MID lVl: -06 to +06/ TRE lVl: -06 to +06
1	USER11 USER2: Select..a preset name.
2	BASS I MIDDlE/ TREBlE: Select asound tone.

AMP GAIN

D.T.EXP

(Digital Track

Expander)

lOW POWER: Limits the maximum volume level to 30..(Select if the maximum power of each speaker is less than 50 Wto prevent damaging the speakers.) ; HIGH POWER: The maximum volume level is 50.

ON: Creates realistic sound by compensating the high-frequenc~

components and restoring the rise-time of the ~aveform that are lost in audio data compression.; OFF: Cancels.

3	Adjust the sound elements of the selected sound tone.				(80 Hz)
	BASS	Frequency: 60/80/100/200 Hz		Default:
		Level:	-06 to +06		(00)

TEl	MUTING*6	ON: Mutes the sounds while using the cellular phone (notconnected
		through KS-BTAlOO).; OFF: Cancels.
l/0	MODE	SUB.W I REAR: Selects whether rear speakers or asubwoofer	are

MIDDlE

TREBlE

0:	Ql.O/ Q1.25/ Q1.5/ Q2.0
Frequency: 0.51 1.0/1.51		2.5 kHz
Level:	-06 to +06	,.
0:	Q0.751 Ql.OI Q1.25
Frequency: 10.01 12.51 15.01 17.5 kHz
Level:	-06 to +06

	(o.LQ)
Default:	(1.0 kHz)
	(00)

	(01.25)
Default:	(1 0.0 kHz)
	(00)

		connected to the REAR/SW line out terminals on the rear panel (through an
		external amplifier).
*	1	Displayed only when [l/0 MODE] is set to [SUB.W] and [SUB.W] is set to
		[ON].	output.
*2		This adjustment will not affect the subwoofer
*3		Displayed only when [SUB.W] is set to [ON].

Q: QFIX (0£1X)

BASS BOOST*2		+01	I +02: Selects your preferred bass boost level.; QEE: Cancels~
lOUD		01 I	02: Boosts low or high frequencies to produce awell-balancedsound
-		at low volume. ; OFF: Cancels.
	......... ... ... .................... .		....... ... ................. ... . .

*4 Displayed only when [l/0 MODE] is set to [SUB.W].
*	5	If you ·are using a two-speaker system, set the fader level to [00]
*	6	Does not work if [BT ADAPTER] is selected for [AUX] in [SRC SElECT].

ENGLISH

I

11