3 Tune into a station you want while “M” is flashing.
To tune into stations of higher frequencies.
To tune into stations of lower frequencies.
•If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.
•If you hold down the button, the frequency keeps changing until you release the button.
Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
•Automatic preset of FM stations: SSM (Strong- station Sequential Memory)
•Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).
1 Select the FM band (FM1 – 3) you want to store FM stations into.
ENGLISH
When an FM stereo broadcast is hard to receive:
F M
Each time you press the button, the FM band changes
as follows:
Press MO (Monaural) while listening to an FM stereo broadcast.
•Each time you press the button, the MO indicator lights up and goes off alternately.
Lights up when receiving an
FM broadcast in stereo.
ST
BEAT POP SOFT LOUD
MO
MO
BEAT POP SOFT LOUD
When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved (the ST indicator goes off).
To restore the stereo effect, press the same
button again.
FM1
FM2
FM3
2 Press and hold both buttons for more than 2 seconds.
BEAT POP SOFT LOUD
“SSM” appears, then disappears when automatic preset is over.
Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3). These stations are preset in the number buttons — No.1 (lowest frequency) to No.6 (highest frequency).
When automatic preset is over, the station stored in button number 1 will be automatically tuned into.
7
