MAINTENANCE

This unit requires very little attention, but you will be able to extend the life of the unit if you follow the instructions below.

To clean the heads

Clean the heads after every 10 hours of use using a wet-type head cleaning tape (available at an audio store).

When the head becomes dirty, you may realize the following symptoms:

Sound quality is reduced.

Sound level decreases.

Sound drops out.

Do not play dirty or dusty tapes.

Do not touch the highly-polished head with any metallic or magnetic tools.

CAUTIONS:

Do not play the tapes with peeling labels; otherwise, they can damage the unit.

Tighten tapes to remove slack since loose tape may become entangled with the mechanism.

Do not leave a cassette in the cassette compartment after use, as the tape may become slack.

The function below is also provided to ensure the longer life of this unit.

Ignition key-off Release/Ignition key- on play

When you turn off the ignition key with a cassette in the compartment, the unit automatically releases the tape from its head.

When you turn on the ignition key with a cassette in the compartment, playback automatically starts.

ENGLISH

To keep the tape clean

Always store the tapes to their storage cases after use.

Do not store tapes in the following places:

Subject to direct sunlight.

With high humidity

At extremely hot temperatures

23

Page 23
Image 23
JVC KS-FX280 manual Maintenance, Ignition key-off Release/Ignition key- on play, To clean the heads, To keep the tape clean