RADIO BASIC OPERATIONS

ENGLISH

LOUD

SEL

DISP

CD CHANGER CONTROL

KS -FX 2 8 0

TAPE

 

 

FM /AM

Multi

Music

ScanCD

CH

MODE SCM

Listening to the radio

1 Select the band (FM1, FM2, FM3 or AM).

You can select any one of FM1, FM2, and FM3 to listen to an FM station.

FM /AM

FM1FM2FM3 AM

To tune in a particular frequency manually:

1 Press FM/AM to select the band.

2Press and hold ¢ or 4 until “M” starts flashing on the display.

Now you can manually change the frequency while “M” is flashing.

3Press ¢ or 4 repeatedly until the frequency you want is reached.

If you hold down the button, the frequency keeps changing until you release the button.

Selected band appears

2 Start searching a station.

When a station is received, searching stops.

To search stations of higher frequencies.

To search stations of lower frequencies.

To stop searching before a station is received, press the same button you have pressed for searching.

8

Storing stations in memory

You can use one of the following two methods to store broadcasting stations in memory.

Automatic preset of FM stations: SSM (Strong- station Sequential Memory)

Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).

1 Select the FM band (FM1, FM2 or FM3) you want to store FM stations into.

FM /AM

FM1FM2FM3 AM

Page 8
Image 8
JVC KS-FX280 Radio Basic Operations, Listening to the radio, Storing stations in memory, FM station automatic preset SSM