Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
•Automatic preset of FM stations: SSM (Strong- station Sequential Memory)
•Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3).
1 Select the FM band (FM1 – 3) you want to store FM stations into.
FM 
FM1
FM2 
FM3
2 Press and hold both buttons for more than 2 seconds.
SSM | SSM | |||
|
| |||
|
|
|
“-
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually.
Ex.: Storing FM station of 88.3 MHz into the preset number 1 of the FM1 band.
1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).
FM 
FM1
FM2 
FM3
AM
AM
2 Tune in to a station (in this example, of 88.3 MHz).
To tune in to stations of higher frequencies
|
To tune in to stations of lower frequencies
ENGLISH
Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2, or FM3). These stations are preset in the number buttons— No.1 (lowest frequency) to No.6 (highest frequency). When automatic preset is over, the station stored in number button 1 will be automatically tuned in.
CONTINUED ON THE NEXT PAGE
9
