To play back tapes recorded with the Dolby B NR*

1 Press MODE to enter the functions mode while listening to a tape.

“MODE” flashes on the upper part of the display, and the number buttons work as different function buttons.

2 Press (Dolby B), while “MODE” is still on

the display so that the (Dolby B) indicator lights up.

“DOLBY B” also appears on the display for several seconds.

To cancel the Dolby B NR, repeat steps 1 and 2 above again.

*Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Finding the beginning of a tune

Multi Music Scan allows you to automatically start playback from the beginning of a specified tune. You can specify up to 9 tunes ahead of or before the current tune.

During playback

Specify where (how many tunes ahead of or before the current tune) the tune you want is located.

Press ¢ to locate a tune ahead of the current tune on the cassette.

Press 4 to locate a tune before the current tune on the cassette.

ENGLISH

Prohibiting cassette ejection

You can prohibit cassette ejection and lock a cassette in the cassette compartment.

While pressing TAPE (CD-CH), press and

hold for more than 2 seconds.

TAPE

“NO EJECT” flashes on the display for about 5 seconds, and the cassette is locked and cannot

be ejected.

To cancel the prohibition and unlock the cassette

While pressing TAPE (CD-CH), press and hold

again for more than 2 seconds.

“EJECT OK” flashes on the display for about 5 seconds, and the cassette is unlocked.

Note:

If you press c while cassette ejection is prohibited, the cassette will not be ejected.

Each time you press the buttons, the number changes up to ±9.

When the beginning of the specified tune is located, playback starts automatically.

Notes:

While locating a specified tune:

If the tape is rewound to its beginning, playback starts from the beginning of that side.

If the tape is fast-forwarded to the end, it is reversed and played from the beginning of the other side.

In the following cases, the Multi Music Scan function may not operate correctly:

Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions between tunes.

Tapes with short non-recorded sections.

Tapes with high level of noise or humming between tunes.

Tapes with tunes recorded at low recording levels.

The Dolby NR setting does not match. For example, if Dolby B NR is on and the tape was recorded with no Dolby NR.

11

Page 11
Image 11
JVC KS-FX490 manual Prohibiting cassette ejection, To play back tapes recorded with the Dolby B NR, During playback