JVC KS-FX490 manual External Component Operations, Playing an external component, English, Tape

EXTERNAL COMPONENT OPERATIONS

ENGLISH

Playing an external component

You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).

Preparations:

•For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

•Before operating the external component using the following procedure, select the external input correctly. (See “To select the external component to use – EXT IN” on page 17.)

1 Select the external component (LINE IN).

TAPE	TAPE	LINE IN
		(or CD)

•If “LINE IN” does not appear on the display, see page 17 and select the external input (“LINE IN”).

•Displayed only when one of the following sources is selected – FM, AM and TAPE.

Note on One-Touch Operation:

When you press TAPE CD-CH, the power automatically comes on. You do not have to press to turn on the power.

2 Turn on the connected component and start playing the source.

3 Adjust the volume.

4 Adjust the sound characteristics you want. (See pages 13 – 14.)

24