![](/images/new-backgrounds/1249497/24949711x1.webp)
BASIC OPERATIONS
ENGLISH
1 | 3 | 2 |
Turning on the power
1 Turn on the power.
“HELLO” appears on the display.
Note on
When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
2 Select the source.
| FM1 | FM2 |
| AM | FM3 |
TAPE | TAPE | CD* |
(or LINE IN **)
To operate the tuner (FM or AM), see pages 7 – 9.
To operate the tape, see pages 10 – 12.
To operate the CD changer,
see pages 19 – 23.
To operate the external component, see page 24.
Notes:
*Without connecting the CD changer you cannot select the CD changer as the source.
**To select the external component other than the CD Changer, the “EXT IN” setting must be set to LINE IN. (See page 17.)
3 Adjust the volume.
To increase the volume.
To decrease the volume.
Volume level appears.
Volume or audio level (see page 17) indicator
4 Adjust the sound as you want. (See pages 13 – 14.)
To drop the volume in a moment
Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
•If you turn the control dial, you can also restore the sound.
To turn off the power
Press and hold until “SEE YOU” appears on the display.
Note:
When you use this unit for the first time, set the
6