ENGLISH
Playing the current tune repeatedly
You can play the current tune repeatedly (Repeat Play).
1 Press M (MODE) to enter the functions mode while playing a tune you want to hear over again on a cassette.
2 Press RPT (repeat), while still in the functions mode, so that “REPEAT” appears on the display.
Lights up when Repeat Play is turned on.
When the tune has been played, the tape is automatically rewound to the beginning of that tune and the same tune will be played again.
To cancel Repeat Play, repeat steps 1 and 2 again so that the RPT indicator goes off.
Note:
In the following cases, Blank Skip and Repeat Play may not operate correctly:
–Tapes with tunes having long pianissimo passages (very quiet parts) or
–Tapes with short
–Tapes with high level noise or humming between tunes.
–Tapes with tunes recorded at low recording levels.
Prohibiting cassette ejection
You can prohibit cassette ejection and lock a
cassette in the cassette compartment.
While pressing TAPE (CD-CH), press and
hold 
for more than 2 seconds.
“NO EJECT” flashes on the display for about
5 seconds, and the cassette is locked and cannot
be ejected.
To cancel the prohibition and unlock the cassette
While pressing TAPE
again for more than 2 seconds.
“EJECT OK” flashes on the display for about 5 seconds, and the cassette is unlocked.
Note:
If you press 0 while cassette ejection is prohibited, the control panel flips down, but the cassette continues to play and cannot be ejected.
20
