JVC KS-FX845R To set the changer display-CHDISP, To select the level meter-LEVEL, Extin, English

To set the changer display—CH DISP

This mode is used to check the display information of the CD changer.

When shipped from the factory, “DISC” is selected.

•DISC: Disc number and track number (or folder number if the current playing disc is an MP3 disc) appear.

•TIME: Elapsed playing time and track number appear.

To select the level meter—LEVEL

You can select the level meter display according to your preference.

When shipped from the factory, “AUDIO 2” is selected.

•AUDIO 1: Shows the audio level indicator.

•AUDIO 2: Alternates “AUDIO 1” setting and illumination display.

• OFF: Erases the audio level indicator.

To select the telephone muting—TEL

This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “MUTING 1” or “MUTING 2” whichever mutes the sounds from this unit. When shipped from the factory, this mode is deactivated.

•MUTING 1: Select this if this setting can mute the sounds while using the cellular phone.

•MUTING 2: Select this if this setting can mute

	the sounds while using the cellular
	phone.
• OFF:	Cancels the telephone muting.

To select the external component to use

—EXT IN

You can connect the external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select which component—CD changer or external component—to use.

When shipped from the factory, CD changer is selected as the external component.

•	CHANGER: To use the CD changer.
•	LINE IN: To use the external component
	other than CD changer.

Note:

For connecting the Line Input Adapter KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

ENGLISH

25