JVC KV-RA2 Sound Adjustment, Press SEL select, Adjust the level with the volume buttons, English

SOUND ADJUSTMENT

You can adjust the sound characteristics to your preference.

1	Display unit only
	Press SEL (select).

Each time you press SEL, the sound adjustment mode changes as follows.

		SEL		VOL	BAS		TRE
				BBE	BAL		FAD
Indication		To do:			Range
VOL (volume)	Adjusts the volume.		00 (min.) — 50 (max.)
BAS*(bass)	Adjusts the bass.		–06 (min.) — +06 (max.)
TRE*(treble)	Adjusts the treble.		–06 (min.) — +06 (max.)
FAD**(fader)	Adjusts the front and rear speakers balance.		R06 (rear only) — F06 (front only)
BAL (balance)	Adjusts the left and right speakers balance.		L06 (left only) — R06			(right only)
BBE*	See “What is BBE?” below.		on — oFF

*Bass sound (BAS), treble sound (TRE) and BBE can be set for CD changer, VCR and car receiver (AUX) separately.

**When you are using a two-speaker system, set fader (FAD) to “00.”

Notes:

•Normally the volume level can be adjusted by pressing the volume buttons. (See page 4.)

•If your car receiver has the same sound adjustment modes as listed above, fix them to the center positions or to “OFF” positions.

•For the volume level on your car receiver, fix it to such a level that you can adjust the volume level properly only with the volume buttons of this unit.

2 Display unit Remote controller

Adjust the level with the volume buttons.

ENGLISH

What is BBE?

The BBE function restores the brilliance and clarity of the original live sound in recording, broadcasts, etc.

When a speaker reproduces sound, it introduces frequency-dependent phase shifting, causing high-frequency sounds to take longer to reach the ear than low frequency sounds. The BBE function adjusts the phase relationship between the low, mid and high frequencies by adding a progressively longer delay time to the low and mid frequencies, so that all frequencies reach the listener’s ears at the proper time.

In addition, the BBE function boosts low and high frequencies, which loudspeakers tend to be less efficient in reproducing, through dynamic, program-driven augmentation.When combined with the phase compensation feature, the resulting sound has a clearer, more finely detailed “live” presence.

Under license from BBE Sound, Inc.

is a trademark of BBE Sound, Inc.

9