Precautions
Disconnecting the stand
If you disconnect the stand, attach the bottom cover and the screw (supplied) into the hole.
1)Place the TV face down on a soft cloth on a table.
2)Remove the screws from the back of the TV.
3) Pull out the stand from the TV.
4)Cover the hole with the supplied bottom cover and tighten the screw.
Notes:
•To
•If you find it difficult to remove the screws from inset screw wells, use a magnetized screwdriver.
* | In the case of placing the 52” TV on the wall, please follow the next steps. |
1) | Remove the TV base from the upper body 2) Attach the upper stand body to the TV. |
| of the stand. |
8