8
Introduction
Camera
AMounting hole (elliptical) x 4
Use these when mounting the camera to the
electrical box. (Apg.22)
BMounting hole (round) x 4
Use these when mounting the camera to the
ceiling or wall. (Apg.18, 20)
COuter Case
Use this in the following cases:
●When mounting the camera directly to the
ceiling or on the wall. (Apg.20)
●When mounting the camera to the electrical
box. (Apg.22)
DDome Cover
The dome cover is fragile. Take care when
handling it.
EInner Dome
Before mounting the camera, remove it and
perform switch setting and image angle
setting. (Apg.18, 20)
FWiring Hole
Break and use this when drawing the cable
from the camera unit without drilling a hole in
the ceiling. (Apg.22)
GInput Power cable
DC 12 V Input: Red (+12 V), Black (GND)
AC 24 V Input: Non-polar. (Apg.16)
HAlarm signal cable (TK-C215V12 only)
Yellow (ALARM IN), Gray (ALARM GND).
(Apg.15)
IProtection Cover
Upon connecting the coaxial cable, protect it
by insulating the metal part of the BNC
connector from the ceiling structure.
JVideo signal output connector (BNC)
(Apg.14)
Name of Parts
B
D
C
A
J
I
G
A
F
B
B
E
H
TK-C215V12 only
TK-C215V4_V12_EN.book Page 8 Wednesday, August 2, 2006 1:18 PM