JVC LT-17D50BK, LT-23D50BK No-Signal and Out Of Range, Detection PC mode, To operate Teletext

Contrast, Bright-1, Colour and Sharpness	button allows you to switch sound between
are described at Picture menu on page 27.	PC and selected PIP source.

Setting PIP Size					No-Signal and Out Of Range
• Using “	” or “	” button select PIP Size.			Detection (PC mode)
• Press “	” or “	” button to change PIP size.			In PC Mode,as no menu is displayed,in
Two different PIP sizes are available.					case that there is no PC input to the TV, it is
Setting PIP Position					displayed an OSD message:
						No input signal detected
• Using “	” or “		” button select PIP Posi-		then the power lamp turns to amber and PC
tion.					will be in PC standby mode. Press AV but-
• Press “	” or “	” button to change PIP posi-			ton, digit buttons or “		” / “	” buttons
					to exit standby mode.
tion.
There are four different PIP positions.					In PC Mode, as no menu is displayed,in
					case that there is no PC input to the TV, but
Programme in the PIP window can be
					the resolution and the vertical frequency is
changed by “			/	” , digit buttons or
					not supported by the concept, it is displayed
AV button. All EXT modes (Except EXT-3) are
					an OSD message:
also available in PIP window. PIP window is
						Signal out of range
removed from the screen by “ ” button.
Source Menu					Analogue Teletext
					Teletext is an information system that dis-
In the Main menu, select “Source” using
					plays text on your TV screen. Using the Tele-
“ ” or “	” button, then enter the Source
					text information system you can view a page
menu by pressing “			” / “	” or “OK” buttons.
					of information on a subject that is available
					in the list of contents (index).
					On screen display is not available in text
					mode.
					Contrast, brightness or colour control is not
					available, but volume control is available in
					text mode.
					To operate Teletext
					• Select a TV station on which Teletext is being
Select the available sources of DIGITAL, TV,					transmitted.
EXT-1, EXT-2, EXT-2 S, EXT-3, EXT-4, EXT-					• Press (TELETEXT) “		” button. Usually the
4S or PC using “			” or “	” button and by
					list of contents (index) is displayed on the
pressing “	” / “	” or “OK” buttons.			screen.	￿￿￿￿￿￿￿￿

Sound in PC mode

• Connect the PC’s Audio output to the TV’s PC Audio In socket with an audio cable.

• On your remote control,using “ ” button to select sound source from TV, EXT-1, EXT-2, EXT-3, EXT-4 and PC options.

•When PIP is displayed on the screen, “ ”

-37 -