In EXT mode, Install menu appears like this:
You can change only Colour system and VCR.
Selecting Programme
• U s i n g “ 
” o r “ 
” b u t t o n s e l e c t Programme.
•To select programme number, you can use “
” / “
” button or Digit Buttons
Selecting Band
Band, can be chosen either,
•“C” or “S” by “
” or “
” button. Selecting Channel
Channel can be changed by “
” or “
” but- ton or by Digit Buttons.
Selecting Colour System
Using “
” or “
” button on Colour System, you can change the colour system to PAL, SECAM or Auto.
Note: In EXT mode, you can choose NTSC
3.58and NTSC 4.43 as well. Selecting Sound System
Using “
” or “
” button on Sound System, you can change the standard to BG, DK, I, L, Lp.
Selecting Fine Tuning
You can use the Fine Tuning process for fine adjustment (after coarse adjustment), if you are not happy about the image on the screen.
Use “
” or “
” button on Fine Tuning item, until getting the best image on the screen.
Selecting Search
To start the search process, press “
” but-
ton for forward search or “
” button for back- ward search. If a signal is found or reaches to end of the band after searching, press
“
” or “
” buttons to continue search pro- cess. To stop the search process when you
want, press “
” or “
” buttons at any time.
Decoder
You can use this mode to connect any de- coder to your TV.
•Press the “
” or “
” buttons to set it “On” or “Off”.
When you select Decoder
Setting VCR ( Video Cassette Recorder ) Mode
•This item can be seen in TV,
•If you want to watch a VCR source from one of these modes, then it will be better to set VCR mode “On”. For this, while the cursor is
on this item press the “
” or “
” buttons to set it “On”.
•If you want to watch a DVD, then you must set this item “off”; because DVD is not a source like a VCR and to see the picture better, you must set the VCR mode “Off”.
To Store Settings
•Press “
” / “
” or “OK” button on Store op- tion to store Install menu settings.
•After stored,
- 31 -
