Selecting BandBand, can be chosen either,•“C” or “S” by “” or “” button. Selecting ChannelChannel can be changed by “” or “” button or by Digit Buttons.Selecting Colour System

Using “” or “” button on Colour System, you can change the colour system to PAL, SECAM or Auto.

Note: In EXT mode, you can choose NTSC3.58and NTSC 4.43 as well. Selecting Sound System

Using “” or “” button on Sound System, you can change the standard to BG, DK, I, L, Lp.

Selecting Fine Tuning

You can use the Fine Tuning process for fine adjustment (after coarse adjustment), if you are not happy about the image on the screen.

Use “” or “” button on Fine Tuning item, until getting the best image on the screen.

Selecting SearchTo start the search process, press “” button

for forward search or “” button for backward search. If a signal is found or reaches to end

of the band after searching, press “” or “” buttons to continue search process. To stop the search process when you want, press

“” or “” buttons at any time.Decoder (EXT-2)You can use this mode to connect any decoder to your TV.•Press the “” or “” buttons to set it “On” or “Off”.

When you select Decoder (EXT-2) “On”, EXT-2 output will be chosen as TV mode only and any scrambled channels will be unscrambled through decoder connected your TV via EXT-2 output.

Setting VCR ( Video Cassette Recorder ) Mode

•This item can be seen in TV, EXT-1, EXT-2, EXT-2S, EXT-3, EXT-4 and EXT-4S modes.

•If you want to watch a VCR source from one of these modes, then it will be better to set VCR mode “On”. For this, while the cursor is

on this item press the “” or “” buttons to set it “On”.

•If you want to watch a DVD, then you must set this item “off”; because DVD is not a source like a VCR and to see the picture better, you must set the VCR mode “Off”.

To Store Settings

•Press “” / “” or “OK” button on Store op- tion to store Install menu settings.

•After stored, T-V LINK menu will appear. If you do not need to do T-V LINK, select Can-

cel and press “” or “OK” button to exit the menu.Program Menu

Press "MENU" button, now you are in main menu. In the main menu, select “Program”

using “” or “” button. Then enter theProgramme menu by pressing “” / “” or “OK” button.Note: There is no Program menu in any EXT modes.

Program Menu is used to delete a channel, to change the programme number of a channel, to give a channel name to a channel, and to start the A.P.S (Autostore) function.

- 30 -