Sound Menu

In the main menu select “Sound” using “” or “” button then enter the Sound menu by

pressing “” / “” or “OK” buttons.The items in this menu are described at Sound menu starting page 28.PIP Picture

In the Main menu, select “PIP Picture” using “” or “” button, then enter the PIP Picture

menu by pressing ““ / “” or “OK” buttons.

This menu is displayed when PIP is displayed on the screen. Otherwise “PIP No Signal” message will be displayed at the bottom of menu.

3,3￿3LFWXUH

&RQWUDVW ￿%ULJKW￿￿￿￿

￿&RORXU 6KDUSQHVV 3,3￿6L]H

3,3￿3RVLWLRQ

￿￿￿￿￿￿￿￿￿￿5(6(7

PIP picture is displayed on the screen by “” button.Contrast, Bright-1, Colour and Sharpness are described at Picture menu on page 26.Setting PIP Size•Using “” or “” button select PIP Size.

•Press “” or “” button to change PIP size. Two different PIP sizes are available. Setting PIP Position

•Using “ ” or “ ” button select PIP Posi- tion.•Press “” or “” button to change PIP posi- tion.
There are four different PIP positions.Programme in the PIP window can be

changed by “ / ” , digit buttons or AV button. All EXT modes (Except EXT-3) are also available in PIP window. PIP window is re-

moved from the screen by “” button.

Source Menu

In the Main menu, select “Source” using “” or “” button, then enter the Source menu by

pressing “” / “” or “OK” buttons.

￿￿￿￿￿￿￿￿￿6RXUFH￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿3&

￿',*,7$/

￿79

(;7￿￿

(;7￿￿

(;7￿￿￿6

(;7￿￿

(;7￿￿

(;7￿￿￿6

3&

Select the available sources of DIGITAL, TV, EXT-1, EXT-2, EXT-2 S, EXT-3, EXT-4, EXT-4S or PC using “” or “” button and by press-

ing “” / “” or “OK” buttons.Sound in PC mode

•Connect the PC’s Audio output to the TV’s PC Audio In socket with an audio cable.

•On your remote control,using “ ” button to select sound source from TV, EXT-1, EXT-2, EXT-3, EXT-4, PC and DIGITAL op- tions.

•When PIP is displayed on the screen, “ ” button allows you to switch sound between PC and selected PIP source.

No-Signal and Out Of Range Detection (PC mode)

In PC Mode,as no menu is displayed,in case that there is no PC input to the TV, it is displayed an OSD message:

No input signal detected

then the power lamp turns to orange and PC will switch to PC standby mode. Press AV but-

ton, digit buttons or “” / “” buttons to exit standby mode.

- 35 -