JVC LT-23S2 manual Connecting headphones, Connecting the PC, Connecting Speakers/Amplifier

Additional preparation

Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-VHS VCR

Connect the equipment to an EXT terminal.

You can choose between an S-VIDEO signal (Y/C signal).

Connecting headphones

Connect the headphones with a stereo mini-jack (3.5 mm diameter) to the headphone socket at the TV.

Connecting the PC

Connect the PC with the D-SUB cable to the D-SUB in at the TV, and connect the sound device of PC with a stereo mini-jack to PC AUDIO IN.

You can adjust the picture by AUTO SETUP function when the PC signal is output correctly, the AUTO SETUP function can optimize the picture position, clock and phase. You can have a fine vision after AUTO SETUP function executed.

Connecting Speakers/Amplifier

See the Audio equipment connection diagram, then connect the audio equipment you desire to the TV.

You can use external front speakers to listen to the TV sound instead of the TV speakers.

Before connecting anything:

•Read the manuals provided with the amplifier and speakers.

•Turn the TV and amplifier off.

•To prevent magnetism from the speakers adversely affecting the TV screen, use magnetically-shielded speakers for the front speakers.

•Note that connecting cables are not supplied.

without terminal covers

R L SUBWOOFER

			AUDIO	SUBWOOFER
	PC
AUDIO		R	OUT	OUT
	IN			L

1Amplifier

2External speakers (Magnetic-shielded type)

•The output from the AUDIO OUT terminal is not interrupted by headphone connection to the TV. You cannot cut the sound from the front speaker even if you connect a headphone to the TV.

•Adjust the volume of the external speakers with the amplifier.

•Connect the subwoofer which carried an amplifier.

•The subwoofer is interlocked with the TV volume.

•You can not connect an amplifier and a Subwoofer at the same time.

28