Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see “Cable TV connections”.

Combination VHF/UHF Antenna (Single 75 ohm cable)

Antenna

Connect the 75 ohm cable from the combination

Jack

75 ohm

VHF/UHF antenna to the antenna jack.

Coaxial

 

Cable

 

Cable TV connections

This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.

For subscribers to basic Cable TV service

 

 

 

 

 

75 ohm

For basic Cable TV service not requiring a Converter/

Antenna

 

 

Descrambler box, connect the 75 ohm Coaxial Cable directly

 

 

Coaxial

to the Antenna Jack on the back of the TV.

Jack

 

 

Cable

 

 

 

 

 

 

 

 

For subscribers to scrambled Cable TV service

If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable, connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV. Follow the connections shown below. Set the TV to the output channel of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to select channels.

Incoming

 

 

75 ohm

 

Antenna

Cable TV

 

Jack

Cable

Converter/

75 ohm Cable to TV

 

Descrambler

 

For subscribers to unscrambled Cable TV service with scrambled premium channels

If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from the Cable TV company or an electronics supply store). Follow the connections shown below. With the switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the “A” position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to tune scrambled channels.

Incoming

 

Converter/

 

 

75 ohm

 

 

Antenna

 

Descrambler

 

Cable TV

 

 

 

Jack

Cable

Splitter

A/B Switch

A

75 ohm Cable to TV

 

B

ENGLISH

11

Page 11
Image 11
JVC LT-24EM71 owner manual Antenna connections, Cable TV connections