Connections to other equipment

(continued)

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below. Left of the unit

ENGLISH

Digital Audio

Coaxial Output

Coaxial digital cable (not supplied)

Front

Speaker

(Left)

Front

Subwoofer Speaker

(Right)

TV

To Coaxial

Digital Audio Input

AV Amplifier with built-in digital surround decoder as listed above

 

Center Speaker

Surround

Surround

Speaker (Left)

Speaker

 

(Right)

NOTE:

• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio. There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.

To connect a HDMI or a DVI device to the unit

The HDMI1/DVI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device.

When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.

To PC/DVI AUDIO IN

Audio cord (not supplied)

To DVI output

Left and Rear of the unit

HDMI - to - DVI adapter cable

 

 

(HDMI type A connector)

 

To HDMI/DVI IN

(not supplied)

or

 

 

HDMI cable (type A connector)

To HDMI out

 

 

(not supplied)

 

DVI device

HDMI device

NOTE:

• When using HDMI1/DVI to connect your HDMI or DVI devices, you must select the corresponding audio input source (HDMI or DVI) on the menu screen (see page 17). Otherwise you will only see the image with no sound.

• If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture you must change the output resolution on the external component.

Should you require further instruction, please contact the manufacturer of the external component.

13

Page 13
Image 13
JVC LT-24EM71 Using an AV Amplifier with built-in digital surround, To connect a Hdmi or a DVI device to the unit